Replace stainless steel 304 glass sliding door hangers step 2:
We would like to embed aluminum in the edges of the left and right sides of the wall, and then place the assembled shower room frame in the middle of the stone base. After we have adjusted the position of the shower block, mark the hole in the aluminum with a pencil, and don't forget to use the pneumatic drill to drill holes on the wall. After that, we will use a plastic hammer to hammer the green expansion glue into the wall. Finally, we will move the shower room body frame to the stone base and lock it with a screw and install a screw cover.
Replace the stainless steel 304 glass sliding door hangers step 3:
The next step is to install a stainless steel sliding door hangers. At this time, we will install a stainless steel sliding door hangers on the upper rail.
Replace the stainless steel 304 glass sliding door hangers Step 4:
Finally, install the bottom door slider hardware on the movable door glass. Since the movable door is already mounted on the upper rail, the bottom door slider hardware on the movable door glass is installed when the door slider hardware is installed (the door rollers and track is installed on the active door glass first, because the bottom door slider hardware is After adjustment, install the door slider hardware, press and hold the adjustment button to insert it into the sliding door rail system; install the water blocking strip and the magnetic stripe; install the handle on the movable door glass.