Door roller is a necessary part to intall an sliding doors, it has advantages that convenient, space-saving, repeatable installation and so on. And we usually used it in the place like bathroom, kitchen, office, hotel and department. The sliding door roller is one of the most important part for sliding door installation. The sliding door system includes sliding door roller, pipe clamp, stopper, floor guide and hanging rail.
How to install the sliding door roller?
1. The spacing of the hanging rail fixing screws is ≤20cm.
2. After the installation of rails must be straight, the top of the hanging rail close to the bottom of the door frame, the bottom of the door frame and the top of the hanging rail should not have gaps to avoid greater vibration and noise.
3. After the support bar is fixed on the door，the height and level of the door can be adjusted by inserting the screw on the connecting screw or the rotating bracket，the best distance is 10mm from the bottom of the door to the floor.
4. The width of the sliding door should be 30-60mm larger than the openings.
5. The door stoppers can be installed on two ends of the rail. you can install it according to the door opening sizes.
6.Finally checking whether the sliding door is woking properly and sliding smoothly.